Boat Care Products

VS721 BOTTOM WAX

Aurora Marine Industries Inc.

High Performance Bottom Wax. Contains VS721TM Fouling Release Barrier.
Protects against Algae, Zebra Mussels and Barnacles.
For Power, Sail, Trailered, Aluminum & Pontoon Boats.
Seals surface against Osmosis Blisters
Improves Speed, Reduces Fuel Consumption (1 to 10 mph on power boats) (¼ to ½ knot on sail boats)
Perfectly Clear. Beautiful Shine.
Apply to Fiberglass, Aluminum & Hard Painted Surfaces
Apply to Drives, Struts, Trim Tabs, Shafts, etc
Race Proven to Increase Performance.

ONE BOTTLE PROTECTS UP TO 25' BOAT WITH ONE COAT
CLEAR SHINY FINISH
REDUCES HULL FRICTION FOR HIGHER SPEED & FEUL ECONOMY
REDUCES OSMOSIS BLISTERS

EASY TO APPLY:
Wipe On & Buff to a Super Slippery, Clear, Protective Barrier Coat. 2 Coats should protect most boats all season.

VS 721 BOTTOM COATTM may be applied to fiber glass, aluminum, hard painted surfaces, out drives, trim tabls, struts, through hull fittings, etc.

DIRECTIONS:
Surface must be clean ans dry. Remove marine growth and waterline stain with AURORA ALGAE STRIPTM and scuff marks and other dirt with AURORA BOAT SCRUBTM.

Apply VS 721 BOTTOM COATTM with adamp sponge or cloth and rub vigorously. Make sure all the exposed surfaces and crevises are coated. Let dry and remove haze with a soft dry cloth. For added protection, apply a 2nd coat after 24 hrs. Allow to cure for 48 hours before launching boat. Lunch boat within 30 days for best results.

Movement of boat through water continuously cleans hull. Stationary boats may be cleaned periodically with a sponge or deck brush. At end of season or upon attachment of marine growth, pressure wash or scrub with deck brush using AURORA BOAT CLEANTM. adult Zebra Muscles and Barnacles may have to be scrapped off and the glue residue removed with AURORA ALGAE STRIPTM.